Interactive 3D lessons made with AI
By @nvr_settle · Updated
These are 8 interactive 3D lessons in the PromptShipped directory. All eight were built with Claude, and each opens in a browser with no install. You can turn a 3D circuit board, follow one breath through a glass body, push a fusion plasma until it fails or practise parallel parking from the driver's seat. For each lesson, you'll find what it teaches, one thing to try first, a credit to the builder, and what the builder said when they shared it.
Numbers from our data (as of November 2, 2026):
- 8 lessons from 3 builders.
- 4 of the 8 builders name three.js in their post, and every post names Claude's Opus 5.5 model.
How we picked these lessons
A lesson is on this page if all of these were true when we checked:
- The builder's own X post says they built it with an AI tool.
- It teaches something step by step, and the main view is in 3D.
- The link opens the live lesson. All 8 loaded on November 2, 2026.
- The app is approved in the PromptShipped directory.
The list isn't ranked. It's grouped by subject.
At a glance
| Lesson | What it teaches | Builder |
|---|---|---|
| Learn Arduino | 16 Arduino Uno lessons on a 3D board | @DilumSanjaya |
| Learn ESP32 | 20 ESP32 lessons, up to Wi-Fi and Bluetooth | @DilumSanjaya |
| Every Joule | GCSE energy physics in ten 3D lessons | @techartist_ |
| Breathing and Respiration | One breath of oxygen through the body | @techartist_ |
| Press Burn Harvest Boost | How a 2026 F1 car works | @techartist_ |
| The Magnetic Bottle | How a tokamak holds a fusion plasma | @RyanSael |
| Backcountry 101 | Fire, water, shelter and rescue skills | @DilumSanjaya |
| Learn to Park | Five ways to park, step by step | @RyanSael |
Electronics: 3D boards you can take apart
Learn Arduino
Built with Claude by @DilumSanjaya. A beginner Arduino course built around a 3D Arduino Uno. Its 16 lessons run from meeting the board and blinking an LED to motors, a servo and a final project, and each one pairs the board's labelled pins with example code and a serial monitor.
Try this: drag or use WASD to pan the board, Q and E to rotate it and scroll to zoom, then open lesson 2, Blink an LED.
The builder's post: "Hardware looks scary until you break it down into small steps." (post). It says the app was made with Opus 5.5.
- Visit
Wire and code Arduino circuits in 3D
learn-arduino-red.vercel.appBeginner Arduino course built around an interactive 3D Arduino Uno, with 16 free lessons, from meeting the board and blinking an LED to motors, servos and a final project. Each lesson labels the board's pins and parts and pairs them with example code, a run button and a serial monitor, while the 3D view can be panned, rotated and zoomed. The builder says it was made with Opus 5.5.
Claude@DilumSanjaya,
ClaudeLearn ESP32
Built with Claude by @DilumSanjaya. The same idea for an ESP32 DevKit board, from the same builder. Its 20 lessons go from flashing two LEDs to Wi-Fi, Bluetooth, board-to-board messages and a pick-and-place arm, each with a schematic and example code.
Try this: start with lesson 1, Meet the ESP32, then jump to lesson 4, Use Wi-Fi.
The builder's post: "Turning complicated hardware into simple, fun lessons" (post). It names Opus 5.5.
- Visit
Follow an ESP32 tutorial for beginners in 3D
learn-esp32.vercel.appAn interactive 3D ESP32 DevKit board that shows beginners what the chip can do, one circuit at a time. Its 20 ESP32 lessons cover wiring LEDs, buttons, touch keys, sensors, motors, servos and steppers, then Wi-Fi, Bluetooth and ESP-NOW. Each lesson pairs a schematic with example code and a run button, and the board can be panned, rotated and zoomed. It comes from the maker of Learn Arduino.
Claude@DilumSanjaya,
Science: physics and biology in 3D
Every Joule
Built with Claude by @techartist_. A 3D physics book in ten lessons that covers the energy topic of GCSE and IGCSE physics, from energy stores and power to efficiency and the conservation of energy. Each diagram lifts off the page as a 3D ink drawing, and energy flows as glowing colour between the stores.
Try this: predict what happens before you test it, then lift the flap for the answer. Teachers' notes and a source for every number are included.
The builder's post: "Nine more lessons from my 3D book about energy, now covering the whole GCSE energy topic" (post). It names Opus 5.5 and Three.js.
- Visit
Learn GCSE energy physics in a 3D book
iamtechartist.comInteractive 3D book on GCSE energy physics, with ten lessons on energy stores, power, efficiency, heating and conservation of energy. Each diagram lifts off the page as a 3D ink drawing, and energy flows as glowing colour between energy stores and transfers. Students predict, test and lift the flap for each answer. It also has an index, a quiz, a source for every number and a teachers' guide mapped to UK and Indian exam boards.
Claude@techartist_,
Breathing and Respiration
Built with Claude by @techartist_. A biology lesson for students of about 11 to 16 that follows one breath of oxygen through a glass human body, from the air in the room to a working muscle and back out. It has ten rooms, each with a short guided tour, a hands-on step and two check-yourself questions.
Try this: watch the airway tree split, then follow the oxygen into the blood and the heart.
The builder's post: "Made a web app for GCSE and middle school biology on how oxygen travels from the air into the body's cells" (post). It names Opus 5.5 and Three.js.
- Visit
Run a 3D gas exchange simulation
iamtechartist.comInteractive 3D biology lesson for students aged about 11 to 16 that follows one breath of oxygen through a glass human body, from the air in the room to a working muscle and back out. Ten rooms each pair a short guided tour with a hands-on step and two check-yourself questions, from the diaphragm and ribs to the airway tree and the air sacs of the respiratory system in 3D. Built with Claude (Opus 5.5) using Three.js.
Claude@techartist_,
Press Burn Harvest Boost
Built with Claude by @techartist_. A 3D look inside a 2026 Formula 1 car in four beats and a guided lap: downforce, the engine, energy recovery under braking and the boost.
Try this: turn up the wind tunnel until the air presses harder than the car weighs, then turn the bodywork to glass to see the V6 burn sustainable fuel.
The builder's post: "At 250 km/h the air pushes a 2026 F1 car down harder than it weighs." (post). It names Claude Opus 5.5 and Three.js.
- Visit
See how a 2026 F1 car works in 3D
iamtechartist.comInteractive 3D lesson on how a 2026 F1 car works, in four beats and a guided lap. Players turn up a wind tunnel until the air presses harder than the car weighs, turn the bodywork to glass to watch sustainable fuel burn in an x-ray V6, brake hard and soft to see how much energy the battery can catch, then spend it in a boost race against a hologram rival. The builder says it was made with Claude Opus 5.5 and Three.js.
Claude@techartist_,
The Magnetic Bottle
Built with Claude by @RyanSael. A tokamak cut open in 3D, showing how two twisted magnetic fields hold a plasma hotter than the Sun's core off the wall. Readouts show core temperature, fusion power and gain.
Try this: set the field, current, shaping and heating, then pick a limit (kink, density, pressure or vertical) and watch the plasma fail, slowed down.
The builder's post: "I asked Opus 5.5 to build an interactive 3D version for educational purposes." (post). The builder says it uses real ITER data.
Interactive 3D tokamak cut open on the bench, showing how a tokamak works as twisted magnetic fields hold a 200-million-degree plasma off the wall. Sliders set field, current, shaping and heating with readouts of core temperature, fusion power and gain, and limit modes (kink, density, pressure, vertical) push the plasma until it fails in slow motion. Built with Claude (Opus 5.5) on real ITER numbers, the builder says.
Claude@RyanSael,
Practical skills: outdoors and behind the wheel
Backcountry 101
Built with Claude by @DilumSanjaya. Basic survival skills in 3D, step by step: making a fire, a bow-drill fire, filtering water, building a lean-to and signalling for rescue. Card sets cover edible and poisonous plants, deadly mushrooms and what to pack in a survival kit.
Try this: open Making Fire and step through its six stages, from gathering materials to putting it out. You can pause, rewind or change the speed.
The builder's post: "Everyone should know basic survival skills." (post). It says the app was made with Opus 5.5.
- Visit
Learn survival skills step by step in 3D
backcountry-101.vercel.appInteractive 3D app that teaches basic survival skills step by step, from lighting a campfire and making a bow drill to filtering water, building a lean-to and signalling for rescue. Each lesson is split into stages with instructions, explanations and tips, plus controls to pause, rewind or change the speed. Card sets cover edible versus poisonous plants, deadly mushrooms and what to pack in a survival kit. Built with Claude Opus 5.5.
Claude@DilumSanjaya,
Learn to Park
Built with Claude by @RyanSael. A 3D parking trainer for parallel, reverse-in, forward-in, angle and hill parking. Each step shows the steering lock, the wheel angle and the turning point, plus a common mistake.
Try this: step through parallel parking, then switch to Practice in the Seat view and drive it yourself, on the right or the left.
The builder's post: "I failed my driving test 3 times before I got my license" (post). It names Opus 5.5 and three.js.
3D parking trainer in the browser that breaks parallel, reverse-in, forward-in, angle and hill parking into short steps. Each step shows the steering lock, wheel angle and turning point plus a common mistake, and Practice mode lets you drive it yourself on the right or left. Try it: step through parallel parking, then switch to Practice in the Seat view. The builder says it was made with Opus 5.5 and three.js.
Claude@RyanSael,
More learning apps built with AI
- All learning apps: Learning and science apps built with AI
- All 3D apps: 3D interactive lessons and 3D apps
- By tool: Apps built with Claude
- Built a 3D lesson with AI? Submit it.
Updated on . We re-check every link when we update this page.
Show the prompt.
Add the prompt you used; it shows on your card and app page with a copy button.
The prompt
